S2510SC - 2.5 SOHC SUBARU Remanufactured Engine

S2510SC - 2.5 SOHC SUBARU Remanufactured Engine

Contact us about this product

* Required Fields

Online price:
$4,610.00


CALL TO VERIFY PRICE AND AVAILABILITY FOR THIS UNIT
Quick Overview:

Tri Star engines are 100% remanufactured, not rebuilt, in the U.S.A. and incorporate the latest updates. All 2.5 liter Subaru engine assemblies are thoroughly simulation tested to verify oil pressure and compression meet our stringent specifications.

See below for more details.
Contact us for questions
Select Product Options
You must complete each * required step below before proceeding to checkout

 

A core deposit is required for this product. Upon return all eligible cores will be refunded in full to your credit card or PayPal account. See our core policy for more information on what is an acceptable core.

Return shipping for cores is FREE.

 

Choose between our standard Limited Warranty included in the price, or upgrade to our "No Fault" Warranty Supplement for an additional charge.

Please note that the "No Fault" Warranty Supplement is only available on applications under our private use warranty. Vehicles used in commercial applications, over one ton, and/or diesel engine applications are not eligible for this upgrade. You can learn the limitations on coverage for each by clicking this link.

 

The Vehicle Identification Number, also known as VIN, is required for warranty tracking and to verify fitment of this part.

Your Vehicle Identification Number (VIN) can be found on the vehicle, insurance papers or vehicle registration.

If searching for the VIN on the vehicle the easiest way to view it is to stand outside the vehicle on the driver's side and look at the corner of the dashboard where it meets the windshield. If the VIN cannot be found there, open the driver's side door and look at the door post (where the door latches when it is closed).

All Vehicle Identification Numbers after 1980 are 17 digits long.

* Required Fields

$4,610.00
Online Price: $4,610.00
Details
See below for more details.
Specs
Part Number
S2510SC
Block
The stress relieved block is completely CNC machined in our state of the art CNC machining center. The block is fully align honed and torque plate honed, then assembled with brass frost plugs and pressure tested.
Short Block Features
Stock camshaft
Hypereutectic pistons
Timing set
Moly piston rings
Brass Frost Plugs
Heads
Surfaced and machined by trained professionals
3 angle valve job
Completely pressure tested
Additional Parts Included
No
Warranty
Private use applications: 3 years, unlimited mileage parts and labor*
Commercial use applications: 18 month or 100,000 miles (whichever occurs first) parts and labor*

Labor time up to $50/hr. and only if originally installed at an automotive repair facility.
Warranties shown are a brief overview, please see link for more information: Click here for warranty overview
Notes
Please note, all information provided on this page is subject to change at any time and is not guaranteed for accuracy.

Part brands may change due to availability, but comparable parts will be used. Contact your sales representative to verify brands at time of sale.

PROPOSITION 65 WARNING:
Crude oil, gasoline, diesel fuel and other petroleum products can expose you to chemicals including toluene and benzene, which are known to the State of California to cause cancer and birth defects or other reproductive harm.

For more information go to www.p65warnings.ca.gov.